jump to the main navigation
jump to the site navigation
jump to the supporting navigation
jump to the content

Interior film / trim

is used in cars for backrest trim, door trim and on the instrument panel. Plasticized PVC foamed leathercloth is often used for backrest trim.

Suitable blowing agents for this application include Porofor® ADC/M-C1 or the activated grades *Genitron® LE and SCE. Mesamoll® can be used as plasticizer: it exhibits good gelling power, permitting a low processing temperature or very high processing speeds.

If flame resistance is required, Disflamoll® DPK or DPO are suitable plasticizers. Disflamoll® DPO is characterized by its low smoke density, good gelling power and low-temperature flexibility. Modified PVC films are commonly used for instrument panel trim.  Fogging is caused by the evaporation of volatile polymer components in the car interior, which then settle on windows and other surfaces.

 

 

* Genitron® is a registered trademark of Bayer AG, Leverkusen. In Japan and North and South America it is sold under the tradename Ficel®.
 
BAYMOD® is a registered trademark of Bayer AG, Leverkusen

 

 


Interior film / trim

 

Interior film / trim

  
Overview of product grades
Grade Name Description
Links 
Baymod® A 60 Modifier for the manufacture of semi-rigid PVC thermoformable film - ABS graft polymer  
Data sheet  DE
EN
Baymod® A 80 Modifier for the manufacture of semi-rigid PVC thermoformable film - SAN copolymer  
Data sheet  DE
EN
Disflamoll® DPK Flame retardant with plasticizing properties for PVC, phenolic resin and NBR - Diphenyl cresyl phosphate  
Data sheet  DE
EN
Disflamoll® DPO Flame retardant with plasticizing properties for PVC and NBR, low smoke density and lightfast - Diphenyl-2-ethylhexyl phosphate  
Data sheet  DE
EN
Disflamoll® TKP Tricresyl phosphate - Flame retardant with plasticizing properties for PVC, phenolic resin and films  
Data sheet  DE
EN
Genitron® / Ficel® LE Highly activated ADC formulation with a low decomposition temperature for processing with extremely short cycle times such as with floorcovering backing foams.  
Data sheet  DE
EN
Genitron® / Ficel® SCE Highly activated ADC formulation with good dispersibility and a low decomposition temperature; especially suitable for chemical embossing.  
Data sheet  DE
EN
Mesamoll® High-solvating, saponification-resistant and highly compatible plasticizer for a large number of polymers - Alkyl sulfonate of phenol  
Data sheet  DE
EN
Porofor® ADC/M-C1 Fine-particle standard ADC with outstanding dispersion developed for the foaming of PVC, rubber and thermoplastics.  
Data sheet  DE
EN