Injektion Moulded Articles
Injektion Moulded Articles Injection molding is the discontinuous manufacture of (injection-) molded parts by mechanically pressing macromolecular molding compounds into a mold. Injection-molded articles are all around us and it is difficult to imagine life without them these days. Examples include housing for electronic devices such as computers or domestic appliances, boxes for storage or transportation, switches and plugs. The use of chemical blowing agents such as Porofor® and Genitron®/Ficel® results in the formation of a foam structure which can considerably reduce the amount of material used and the weight of the injection-molded part. Even small amounts of Porofor® and Genitron®/Ficel® create smooth surfaces without sink marks.
* Genitron® is a registered trademark of Bayer AG, Leverkusen. In Japan and North and South America it is sold under the tradename Ficel®.
Injektion Moulded Articles |
||||
 |
||||
 |
||||
| Overview of product grades | ||||
|
||||
| Grade Name | Description |
Links
|
||
 |
||||
| Genitron® / Ficel UN-30 | Masterbatch of an endo/exothermic blowing agent for the injection moulding of thermoplastics - 30 % blowing agent preparation in EVA |
|
||
|
||||
| Genitron® / Ficel VP KA 9174 | 60% Genitron® / Ficel® VP KA 9175 in EVA |
|
||
|
||||
LANXESS Links
